Dell POWEREDGE M1000E - Manual (Page 111)

2-81
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
clear ipc
clear ipc
Use the clear ipc privileged EXEC command on the switch stack or on a standalone switch to clear
Interprocess Communications Protocol (IPC) statistics.
clear ipc {queue-statistics | statistics}
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines You can clear all statistics by using the clear ipc statistics command, or you can clear only the queue
statistics by using the clear ipc queue-statistics command.
Examples This example shows how to clear all statistics:
Switch# clear ipc statistics
This example shows how to clear only the queue statistics:
Switch# clear ipc queue-statistics
You can verify that the statistics were deleted by entering the show ipc rpc or the show ipc session
privileged EXEC command.
Related Commands
queue-statistics Clear the IPC queue statistics.
statistics Clear the IPC statistics.
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
show ipc {rpc | session} Displays the IPC multicast routing statistics.