Dell POWEREDGE M1000E - Manual (Page 504)

2-474
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show controllers tcam
show controllers tcam
Use the show controllers tcam privileged EXEC command to display the state of the registers for all
hardware memory in the system and for all hardware interface ASICs that are content-addressable
memory-controllers.
show controllers tcam [asic [number]] [detail] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
asic (Optional) Display port ASIC hardware information.
number (Optional) Display information for the specified port ASIC number. The range is
from 0 to 15.
detail (Optional) Display detailed hardware register information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.