Debug platform phy – Dell POWEREDGE M1000E User Manual
Page 968
B-52
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform phy
debug platform phy
Use the debug platform phy privileged EXEC command to enable debugging of PHY driver
information. Use the no form of this command to disable debugging.
debug platform phy {automdix | cablediag | dual-purpose | flcd {configure | ipc | iter | trace} |
flowcontrol | forced | init-seq | link-status | read | sfp | show-controller | speed | write |
xenpak}
no debug platform phy {automdix | cablediag | dual-purpose | flcd {configure | ipc | iter | trace}
| flowcontrol | forced | init-seq | link-status | read | sfp | show-controller | speed | write |
xenpak}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
automdix
Display PHY automatic medium-dependent interface crossover (auto-MDIX)
debug messages.
cablediag
Display PHY cable-diagnostic debug messages.
dual-purpose
Display PHY dual-purpose event debug messages.
flcd {configure | ipc |
iter | trace}
Display PHY FLCD debug messages. The keywords have these meanings:
•
configure—Display PHY configure debug messages.
•
ipc—Display Interprocess Communication Protocol (IPC) debug
messages.
•
iter—Display iter debug messages.
•
trace—Display trace debug messages.
flowcontrol
Display PHY flowcontrol debug messages.
forced
Display PHY forced-mode debug messages.
init-seq
Display PHY initialization-sequence debug messages.
link-status
Display PHY link-status debug messages.
read
Display PHY-read debug messages.
sfp
Display PHY small form-factor pluggable (SFP) modules debug messages.
show-controller
Display PHY show-controller debug messages.
speed
Display PHY speed-change debug messages.
write
Display PHY-write debug messages.
xenpak
Display PHY XENPAK debug messages
Release
Modification
12.2(40)EX1
This command was introduced.