Dell POWEREDGE M1000E - Manual (Page 182)

2-152
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
energywise (global configuration)
energywise (global configuration)
Use the energywise global configuration command to enable and configure EnergyWise on an entity.
Use the no form of this command to disable EnergyWise and to remove the EnergyWise configuration.
energywise {importance importance | keywords word,word,... | level level | management
udp-port-number | name name | neighbor [hostname| ip-address] udp-port-number | role role}
no energywise {importance | keywords | management | name | neighbor | role}
Syntax Description
Defaults EnergyWise is disabled.
The importance is 1.
No keywords are defined.
importance importance Set the importance of the entity.
The range is from 1 to 100.
keywords word,word,... Assign at least one keyword for the entity.
When assigning multiple keywords, separate the keywords with commas,
and do not use spaces between keywords.
• You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
• Do not use an asterisk (*) or a blank space between the characters and
symbols.
level level Set the power level of the entity.
The range is from 1 to 10.
management
udp-port-number Specify the UDP port that sends and receives queries.
The range is from 1 to 65000.
name name Specify the EnergyWise-specific entity name.
• You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
• Do not use an asterisk (*) or a blank space between the characters and
symbols.
neighbor [hostname|
ip-address]
udp-port-number Assign a static neighbor:
• (Optional) Hostname (hostname) or IP address (ip-address).
• UDP port (udp-port-number) that sends and receives queries.
The range is from 1 to 65000.
role role Specify the role of the entity in the EnergyWise domain. For example,
lobby.b20.
• You can enter alphanumeric characters and symbols such as #, (, %, !, or
&.
• Do not use an asterisk (*) or a blank space between the characters and
symbols.