Dell POWEREDGE M1000E - Manual (Page 610)

2-580
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show link state group
show link state group
Use the show link state group privileged EXEC command to display the link-state group information.
show link state group [number] [detail] [ | {begin | exclude | include} expression]
Syntax Description
Defaults There is no default.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use the show link state group command to display the link-state group information. Enter this
command without keywords to display information about all link-state groups. Enter the group number
to display information specific to the group.
Enter the detail keyword to display detailed information about the group. The output for the show link
state group detail command displays only those link-state groups that have link-state tracking enabled
or that have upstream or downstream interfaces (or both) configured. If there is no link-state
configuration for a group, the group is not shown as enabled or disabled.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show link state group 1 command:
Switch> show link state group 1
Link State Group: 1 Status: Enabled, Down
number (Optional) Number of the link-state group.
detail (Optional) Specify that detailed information appears.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.