Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 104)

98 Managing Views Welch Allyn
View Customizations for Mapped by patient location
As previously described, some additional steps are required when creating a view which
is to be organized for Mapped by patient location.
1. Customization windows appear when this view organization is chosen. An example is
shown below in Figure 5-29.
Figure 14-6: Mapped by patient location view configuration example
2. Observe that there are two sub-areas.
• One area contains a bed list with rooms and beds in ascending order as
previously configured for the covered area.
• The second area contains a layout map for the view chosen.
3. To map a room and be to a tile location:
a. In the bed list, click on the first room and bed at the top.
b. Click on the desired tile location in layout map. The room and bed now appear
in the layout map.
c. Once placed on the layout map, the room and bed are removed from the bed list.
d. The next room and bed are automatically selected in the bed list and ready to
be placed. An example is shown in Figure 5-30 below.