Backup corepoint configuration - create a nix file – Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 42
36
Backup & Restore
Welch Allyn
Backup Corepoint configuration - create a NIX file
Create a backup of the current Corepoint configuration which may be needed in the case
of a replacing the system hardware in the event of failure.
1.
On the Connex server, go to Start > All Programs > Corepoint Health > Corepoint
Integration Engine > Configuration to being the configuration tool.
2.
Login as Manager. The Corepoint Integration Engine Configuration tool appears.
Figure 7-2: CIE configuration tool main display with navigator window example
3.
In the navigator window, locate the Derivatives area on the left side of the window.
4.
Right-click on the root directory /. An example is shown below.
Note
These steps only apply if the Closet Service is licensed and configured to support
HL7 interfaces, including ADT and/or ORU connections