Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 34)

28 Connex Server Startup Welch Allyn
Table 5-2: External EMR facing connection names and functions, typical
WA_ADT_IB Inbound ADT between facility HIS and Corepoint (External)
WA_ORU_OB_UNCONFIRMED Outbound ORU unconfirmed data between Corepoint and facility HIS (External)
WA_ORU_OB_CONFIRMED Outbound ORU confirmed data between Corepoint and facility HIS (External)
Connections names may appear differently on your system from those shown in
the examples, as interfaces are customized based on facility needs and options
purchased.Refer to the Connex CS HL7 Interface Guide for additional
information.
8. A number of internal connections to the Corepoint application are also observed on
the connections page. A typical list of connections which connect to other systems
and processes in the Connex CS application (internal to Connex CS) is described in
“Table 5-3: Internal Welch ALlyn facing connection names and functions” .
Table 5-3: Internal Welch ALlyn facing connection names and functions
WA_ADT_OB Outbound ADT data between Corepoint and Connex server (Internal)
WA_ORU_IB_CONTINUOUS1 Inbound Continuous ORU data between Central Station 1 and Connex (Internal)
WA_ORU_IB_CONTINUOUS2 Inbound Continuous ORU data between Central Station 2 and Connex (Internal)
WA_ORU_IB_EPISODIC Inbound Episodic ORU data between Connex server and Corepoint (Internal)
9. In the above example shown in “Figure 5-8: Corepoint administration console
connections updated view” on page 27, the connections for WA_ADT_IB and the
WA_ADT_OB are both green or connected. This is the minimum state that should be
present for ADT connections.
a. The WA_ADT_IB connection may be shown in yellow if an interface between
Corepoint and the facility HIS has not been established.
Apply Customer Provided MSSQL Standard Licence Key
New Connex Servers (hardware or virtual) ship with a temporary MSSQL key that must be
changed to use a customer supplied key prior to using the Connex Server in a production
environment. Follow the steps detailed in
“Apply your MSSQL Standard License Key to
the Connex Server” on page 160 for specific instructions.
Note