Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 67)

9
61
Promoting a Warm Spare
Following are the steps to assign the current host PC to station.
1. Select the “Warm Spare” tab. An example is shown in “Figure 9-1: Warm Spare tab
example” .
The warm spare tab will only be available if the current host pc is NOT assigned to
a station.
Figure 9-1: Warm Spare tab example
2. Select the desired station to assign to. In the example shown in “Figure 9-2: Select
host for warm spare assignment example” , the station is “CS1_Station”.
Note