Standard central station startup, Warm spare station startup – Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 25
Connex CS Admin Guide
Central Station Startup
19
Standard central station startup
1.
If properly configured, the central station should automatically startup with the
Connex CS application running.
2.
Upon successful start-up of the Connex CS application, the main screen is displayed.
See
“Figure 4-1: Connex CS main screen example”
below.
3.
Some additional configuration may be required on site. Refer to other chapters in this
manual for additional information subjects related to configuration and localization.
4.
Refer to Appendix A
on page 125 if problems are encountered
with starting up the Connex CS Central Station CPU.
Figure 4-1: Connex CS main screen example
Warm Spare station startup
If the station is configured as a Warm Spare:
1.
Upon successful start-up of the Connex CS application, the Warm Spare screen is
displayed. An example is shown in
“Figure 4-2: Warm Spare main screen example”
.
2.
With the exception of print drivers installation, typically no additional configuration is
required beyond this point.
a.
Print drivers may be required to work with customer supplied printers. Refer to
“Network, Printer, Time & Date config.”
on page 29 for additional information on
installing print drivers.