Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 16
Advertising
10
Safety warnings and cautions
Welch Allyn
•
Any assembly or subassembly that has an exposed circuit board should be treated as
a static sensitive device.
•
Avoid touching the contacts or components on circuit board assemblies. Handle by
the edges of the board whenever practical
•
Remove or insert static-sensitive components and assemblies only with system
power turned off.
•
Insert and seal static-sensitive components and assemblies into their original static-
shielding bags before removing them from static-protected areas.
Advertising