Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 115)

Connex CS Admin Guide Connex Database Restore 109
Figure 17-1: Database object explorer example screen
2. If there is a WADB database, right-click on the WADB database node and select

Tasks > Restore > Database.
3. If there is no WADB database, right-click on the Databases node and select “Restore
Database…”
4. In the “Source for restore” section, select “From device”. An example is shown below
in
“Figure 17-2: Restore database source selection example screen” .
Figure 17-2: Restore database source selection example screen