Restore patients and users – Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 46
40
Backup & Restore
Welch Allyn
Restore Patients and Users
The Administration tool tab has functionality to backup and restore configuration
information for the system and users. Tasks may be completed at any workstation or the
Connex server, and only needs to be done once for the entire network of central stations
and Connex server.
To restore Connex CS patients or users:
1.
Insert a USB flash drive into one of the USB ports on the CPU front panel.
2.
On the navigation area, click on Settings. The login screen appears.
3.
Login using your account User ID and Password information. Upon success the
Settings window appears.
4.
Select the Admin tools tab > Import data > Patients or Users. The select file
window appears. Select Browse and navigate to the import source file location. An
example is shown below in
“Figure 7-8: Import data Patients list window example”
Patients list and Users list import functions support CSV type files only.
5.
See
on page 42 for additional information as needed
6.
See
on page 43 for additional information as needed.
7.
Select the file, and select Open.
8.
The selected file name appears in the Import data window Select file area. Select
Import, and confirm the select.
9.
Restart for changes to take affect.
Note
The import patients settings and users functions described in this section restore
functions from input files previously saved or created off-line. Use care to select
the proper file for import functions (restore).
Caution Importing of patients is not used for standard clinical workflow, but is
described herein and may be used for exercise during testing or demonstration
purposes.
Note