Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 59)

Connex CS Admin Guide Location Management 53
To change Room or Bed values:
1. In the Master bed list window, click Edit to make changes.
When making changes to rooms and beds ensure that the bed is not currently in
use or assigned to a patient.
2. If corrections are needed to a room value, click on the room to be changed and then
click Delete.
3. A pop-up window appears asking to confirm the removal. Click Yes to confirm the
removal, or No to cancel.
4. Re-enter the room and bed information as needed.
Removal of a room with more than one bed will also all remove associated beds.
5. If corrections are needed to a single bed value, click on the room and bed to be
changed and then click Delete.
6. A pop-up window appears asking to confirm the removal. Click Yes to confirm the
removal, or No to cancel.
7. Re-enter room and bed information as needed.
Note
Note