Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 76)

70 License Pool Configuration Welch Allyn
4. The values contained in the Total Units column for each row correspond with the
quantity of licenses purchased for that feature.
5. In the example above, 480 units corresponds with the maximum support for a
network. Each central station can monitor up to 48 patients, and there are 10 central
stations per network. (48 x 10 = 480).
6. By default, all new licenses are unassigned, and must be assigned to a unit for proper
operation.
7. Click on Edit near the bottom of the window.
Automatically assign per covered area licenses
If the network is configured with only a single covered area, the Allocate button appears
as available.
1. Click on Allocate All button to assign all available licenses from the Total Units to the
single covered area. See
“Figure 11-1: License Pool Configuration window example”
on page 69 for an example.
2. The UNASSIGNED license pool automatically decreases as license are assigned to
the covered area.
The Allocate All function limits the quantity of licenses for any one feature to no
more than 48 per covered area by design.
Manually assign per covered area licenses
Licenses must be manually assigned when more than 1 covered area is configured on the
network. The Allocate All button appears as unavailable as well.
1. Identify the column associated with the Covered Area name for the central station.
2. Double click in a field for the Unit, and enter a quantity of licenses to be allocated for
each feature. Refer to the Connex CS Customer Project Req Form, Appendix B2 as
needed for additional information.
3. A common licensing model involves assigning licenses for
ContinuousMonitoringView, ContinousTrends, FlowSheet, GraphicalTrend, and one of
the FullDisclosure features. See
“Figure 11-2: Per Covered Area Licenses assignment
example” on page 71below.
Note