Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 123)

18
117
Configure NRS
It may be necessary to configure Network Rendezvous Services. NRS runs on each
central station and Connex server.
On the central station, NRS responds to devices which should be routed to the station it is
running on. NRS uses the devices table to determine which station a device should be
routed to. See
“Managing Device assignments” on page 87 for additional information
about configuring devices assignments.
On the Connex server NRS responds to devices in episodic profiles (e.g Spot monitoring).
To configure Network Rendezvous Services:
1. From the Settings > Advanced settings (if required) > Admin tools > Stations
menu, click on Networked Rendezvous Services. The Network Rendezvous
Services (NRS) window appears. An example is show below in
“Figure 18-1: Network
Rendezvous Services window example” on page 118.