Change date, time, and time zone – Welch Allyn Connex CS Central Station & Server - User Manual User Manual

Page 38

Advertising
background image

32

Network, Printer, Time & Date config.

Welch Allyn

If the printer was not found using search:

1.

Click The printer that I want isn’t listed.

2.

Select the radio button next to Add a printer using a TCP/IP address or hostname,
and then select Next.

3.

Leave Device type as Autodetect.

4.

Enter the IP address of the printer.

5.

Ignore the Port name, and select Next.

6.

Select the printer manufacturer and model from the menus.

7.

If the printer is not listed, select Have Disk, and browse to the location of the .INF
driver file. Select OK when ready.

8.

Click on the printer, and then select Next.

9.

Change the name of the printer as desired and select Next.

10. For printer sharing, select an option and then select Next.

11. Select Print a test page. and then select Finish.

12. Confirm that a test print was printed by the printer.

13. The printer appears in the Control Panel Printers and Faxes window.

14. If more than one printer is installed, choose a printer to set as the default.

Change Date, Time, and Time zone

It may become necessary to adjust the date and time to local settings. Use standard
Windows control functions to adjust the date, time, and time zone settings as necessary.

1.

For a standalone Central Station, not installed on a domain, the Internet Time tab will
be available.

a.

Click on Internet time > Change settings.

b.

Click on Synchronize with an Internet time server.

c.

Use the drop down list to select time.nist.gov.

d.

Click Update now and confirm that the time is updated within shortly.

2.

Click OK, and apply all changes when finished.

3.

For a network that includes a Central Station, and Connex server, refer to

“Time

Synchronization”

on page 103 for additional information as needed.

Caution Date, time, and time zone settings must be set identical on the Central
Station, Connex server, and attached devices. If time, date, and time zone
settings are not the same, devices may not be able to communicate with the
Central Station or Connex server.

Advertising