Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 85)

Connex CS Admin Guide Localize Station settings 79
Configure continuous vitals outbound
Continuous vitals outbound controls:
1. From the Settings > Advanced settings (if required) > Stations Settings tab, click
on Continuous vitals outbound. The Continuous vitals outbound window appears.
2. Select the Edit to make changes.
3. By default, the station is configured to use the global inherited value. Click disabled to
make a change, and use the drop-down menu to select an interval for sending
continuous vitals data to the HIS application. An example is shown if
“Figure 12-8:
Continuous vitals outbound configuration window example” on page 79 below.
Only change the port number if directed by Welch Allyn Applications Engineering.
This port is used for internal communication only between the central station and
the Connex server Corepoint integration engine. This is not the port used for
external communication with the facility’s HIS application.
4. Click Save when finished, and click Back to return to the main Station Settings tab.
Figure 12-8: Continuous vitals outbound configuration window example
Note