Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 56)

50 Location Management Welch Allyn
Add a New Room and Bed
In the Units window, click on the newly created Unit name, 3SMS in the above example.
The Unit name appears in the header for the lower Room and Bed windows.
There are a number of different methods that can be used to add a room and bed
including:
• Add a single room and bed.
• Add a range of rooms and beds.
• Change room and bed values.
• Copy rooms and beds info from a CSV file.
To add a single room and bed:
1. In the Master bed list window, click Edit to make changes.
2. Click in the Room field and enter a Room number.
3. Click in the Bed field and enter a Bed name. See Figure 5-8 for an example.
Figure 8-7: Single Room and Bed entry fields example
4. Click Add. Then new room and bed information appear in the respective fields.
5. Repeat steps 1 through 3 to additional rooms and beds. See Figure 5-9 for an
example.
Rooms and beds will be displayed in descending order, not the order in which
they were entered.
Rooms and beds will be displayed in descending order for the Unit, not the order
in which they were entered
6. Click Save when finished.
Note
Note