Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 77)

Connex CS Admin Guide License Pool Configuration 71
Figure 11-2: Per Covered Area Licenses assignment example
4. Licenses are automatically removed from the UNASSIGNED column.
5. Repeat steps 1 through 4 for each Covered Area on the network.
Assign Per Care Unit Licenses
Per Care Unit Licenses are only used for HL7 interfaces with the customer’s EMR, and
are deployed as one per unit, on or off. Always refer to the Connex CS Customer Project
Req. Form when configuring Per Care Unit Licenses.
1. Identify the column associated with the Unit name for the central station.
2. Click in the box for the Unit, to enable a license for each feature. Refer to the Connex
CS Customer Project Req Form, Appendix B2 as needed.
3. If there are more that one Unit on the network, repeat steps 1through 2 for each Unit.
When Complete...
1. Confirm that all information listed in the Licensing Pool configuration is complete, and
matches the information contained in the Connex CS Customer Project Req Form,
Appendix B2.
2. Click Save when finished.