Add a covered area – Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 62
56
Location Management
Welch Allyn
Add a Covered area
The Covered area window contains configuration tools that bind all of the previously
entered location information together with a station. The process described in this section
includes:
•
Add a new covered area
•
Assign default location
•
Assign bed to the covered area
•
Assign a station to the covered area.
The binding of a covered area and specific bed locations to a specific station name
together completes the configuration of location management settings prior to deploying
to a host.
To get started:
1.
From the Settings > Advanced settings (if required)> Admin tools > Stations >
Location management menu, click on Covered Areas. The Covered areas window
appears. An example is show below in
“Figure 8-13: Master bed list default window
Caution Any time changes are made to the Master Bed List, Covered Area, or
Licensing, the affected Central Station should be restarted prior to clinical usage.