Restore the database from backup – Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 114
108
Connex Database Restore
Welch Allyn
For a connected environment with a Connex server:
1.
If restoring any database in a connected environment with a Connex server, stop the
data sync service on ALL central stations.
2.
The sync service only runs on central station platforms and in a connected
environment. This step is not necessary in a stand-alone environment.
Stop service: Welch Allyn Connex Data Synchronization Service
If restoring the database on the central server, in a connected environment
1.
Stop the services and disable the tasks listed below.
a.
Stop service: Welch Allyn Process Monitor Service
b.
Stop service: Welch Allyn Network Rendezvous Service
c.
Stop service: Welch Allyn Episodic Connectivity Service
d.
Stop service: Welch AllynRSDSGateway
e.
Stop service: Welch Allyn Connex Client Services
f.
Disable Scheduled task: Welch Allyn Connex DataBackup
g.
Disable Scheduled task: Welch Allyn Connex Data Life Time Manager
h.
Disable Scheduled task: Welch Allyn Connex Late ADT Manager
If restoring the database on a central station, in a connected environment or in a
stand-alone environment
1.
Close the CS application, stop the services, and disable the tasks listed below.
a.
Stop service: Welch Allyn Network Rendezvous Service
b.
Stop service: Welch Allyn Connex Continuous Connectivity Services
c.
Stop service: Welch AllynRSDSGateway
d.
Stop service: Welch Allyn Connex Trend Data Exporter Service
e.
Stop service: Welch Allyn Connex Client Services
f.
Disable Scheduled task: Welch Allyn Connex DataBackup
g.
Disable Scheduled task: Welch Allyn Connex Data Life Time Manager
Restore the database from backup
1.
Open Object Explorer and expand the Databases node. An example is shown below
in