Localize station settings, Vital signs settings – Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 79
12
73
Localize Station settings
Additional configuration may be needed to meet the clinical desired settings, again using
the Settings menu and tool structure.
Global settings and defaults, applied to all Central Stations, are controlled in Admin tools
> Settings > Stations.
Vital Signs settings
To change Vital Signs settings:
1.
From the Settings > Advanced settings (if required) > Admin tools > Settings
menu, click on Stations. The Station Settings window appears.
2.
Select Vital Signs > General to display a list of support episodic parameters made
available to all clinicians. An example is show below in
“Figure 12-1: Vital Signs
General Parameters configuration window example”
on page 74.
3.
By default, all parameters are enabled. To change settings, select Edit, make changes
to the available measurements list, and select Save when finished.
4.
Select the Back button to return to the previous menu.
5.
By default, all Vital Signs modifiers are enabled and available at Connex CS. If changes
for Vital Signs modifiers are requested, such as disabling modifiers, select each
desired parameter and navigate to the appropriate screen menus, make changes and
save as desired.
6.
Use the Back button to navigate back to Station Settings when complete.