Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 61)

Connex CS Admin Guide Location Management 55
4. Click on the gray text within the CSV file window.
5. Copy and paste room and bed information from a CSV file into the window. An
example is shown in
“Figure 8-12: Copy and paste from CSV file window with data
example” on page 55.
a. Alternately type room and bed info directly into the window.
b. Text should be of the format room,bed with no spaces.
c. Type room info only as in the case of a single bed room with bed name.
d. The use of the comma in the room or bed file name is not allowed.
Figure 8-12: Copy and paste from CSV file window with data example
6. Click Add to add the rooms and beds to the unit.
7. Click Save when finished.
When complete...
1. Confirm that all information listed in the Master bed list is complete, and matches the
information contained in the Connex CS Customer Project Req. Form.
2. Click Save when finished.
3. Click on the Back button in the window header. The Location management menu
appears.
Caution Any time changes are made to the Master Bed List, Covered Area, or
Licensing, the affected Central Station should be restarted prior to clinical usage.