Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 63
Connex CS Admin Guide
Location Management
57
Figure 8-13: Master bed list default window example
2.
Observe that there are four sub-windows within the Covered areas main window.
3.
Click on Edit near the bottom of the window.
4.
Create a new covered area if there are none present.
Caution The covered area name will appear in the upper left corner of the
Connex CS display screen. Always refer to the Connex CS Customer Project
Req. Form when entering information in these fields.
5.
Click in the Enter new covered area field and enter the covered area name. An
example is shown in
“Figure 8-14: Add covered area example”
.
Figure 8-14: Add covered area example
6.
Click Add when finished. The newly create covered area appears above in the
Covered areas window by name.