FaxBack NET SatisFAXtion 8.7 (Including R3) - Manual - Manual (Page 114)

2 – Server Administration NET SatisFAXtion 8.7 Manual 114
2.9.4.2
Exchange 2007 and Exchange 2010 Routing
If your organization uses Exchange as their Mail Transport Agent, it is recom-
mended to configure an SMTP Connector to route mail messages to the NET
SatisFAXtion SMTP Gateway. Alternate methods (e.g. DNS MX records) will
also work, see above for details.
2.9.4.2.1
Add a Send Connector to the Hub Transport
Open the Microsoft Exchange Management Console. Expand Organization Con-
figuration . Right-click on Hub Transport, and choose New Send Connector .
This will launch the New SMTP Send Connector wizard.
Enter the name of this connector. It is recommended to name the connector the
same as the address space this connector will handle.