FaxBack NET SatisFAXtion 8.7 (Including R3) - Manual - Manual (Page 21)

2 – Server Administration NET SatisFAXtion 8.7 Manual 21
Select a port, and you can enable and disable send and receive capabilities using
the
Allow port to... Send Faxes, Receive Faxes checkboxes at the bottom of the
window.
2.2.1.1.1
Brooktrout TR1034
Configured ports on Brooktrout TR1034 cards (and recent models of TruFax
100 and 200 cards) will not show up in
Change Server Settings. Configuration
must be done in the registry. Under [HKLM\Software\FaxBack\ICANFax] you
will find one key per port. Look for keys named similarly to BOS_02_001 . Under
each key will be a mode string value, this controls whether a port can send or
receive.
[HKLM\Software\FaxBack\ICANFax\<portname>]
" mode" = "fax_in,fax_out"
Set the mode to reflect how you want the port configured. To only send faxes,
set
"mode" = "fax_out"
. To only receive faxes, set
"mode" = "fax_in"
. To
disable the port, set "mode" = "" (i.e. remove the value from mode ).
Manually restart the NET SatisFAXtion service after making any changes to the
registry.
Illustration 2.2.1.1#1: Change Server Settings – Fax Hardware Settings