FaxBack NET SatisFAXtion 8.7 (Including R3) - Manual - Manual (Page 224)

4 – Appendices NET SatisFAXtion 8.7 Manual 224
4.2.1.6
DotFax Plugin
rings_before_answer [dword 0–255]: Number of rings before modem ac-
cepts call. Default: 1
send_port_count [dword 0–65535]: Number of send-only ports to configure.
send_receive_port_count [dword 0–65535]: Number of send/receive ports
to configure.
receive_port_count [dword 0–65535]: Number of receive-only ports to con-
figure.
csid [string(20)]: The CSI for receive and the TSI for send.
4.2.1.7
Administration
Configuration key for the Administration program.
BillingCodeManager [string]: Path to BillingCodeManager.exe.
Reporting [string]: Path to Reports.exe.
4.2.1.7.1
Loader
(Default) [string]: Resource.dll offset.
4.2.1.8
Archive
Legacy Export module.
Activated [boolean]: Determines if legacy export module is loaded and func-
tioning.
4.2.1.9
ASCIIPacketServer
AllowMissingFiles [boolean]: This parameter allows you to configure your
system to deliver a fax if ANY of the files requested exist. By default, ALL the
requested documents must exist in order for a packet to be processed and a
fax submitted.
If
AllowMissingFiles
is set to 1, the Connector will still send a message even
if some of the files listed in the packet are missing. If AllowMissingFiles is 0
or not present, the usual behavior prevails.
If
AllowMissingFiles
is 1 and all the files listed in the packet are missing, AS-
C2CAS will put the following error in the finished packet:
[Logging]
FaxStatusNum = 2
FaxStatus=Nothing to send
AppendPageCountToFileName [boolean]: If
1
, this setting enables a custom
naming convention (
<filename>-<number_of_pages>.<extension>
) applied
to the image file received when in SINGLE_CALL_RECV mode. This is a custom,
limited implementation, where it’s possible for a prior instance of a file results