FaxBack NET SatisFAXtion 8.7 (Including R3) - Manual - Manual (Page 198)

4 – Appendices NET SatisFAXtion 8.7 Manual 198
SOLE and the debug_show_file_path is specified in the registry, then you can
get both
CONSOLE
and
FILE
debug output simultaneously. This is a device spe-
cific setting, but you can set the default for all devices by specifying this under
the global ICANFax section.
header_date [string]: Specifies format and delimiters of date string in the fax
page header. Format: Any order of M/D/Y; any delimiter to replace "/"; 4-digit
(YYYY) year. Upper case means to use leading zeros; lower-case means to use
spaces in place of leading zeros. (For example, for February 4, 2006,
MM/DD/YY
will produce 02/04/06 ; mm/dd/yy will produce 2/ 4/06 .) Default: mm/DD/YY .
header_from [string]: Text to display before the name of the sender in the fax
page header.
header_page [string]: Specifies format of the “page x of y” string in the fax
page header. Default:
p. ? of ?
.
header_time [string]: Specifies 12 or 24-hour time format of time string in the
fax page. Format:
12 or 24 . Default: 12 .
header_to [string]: Text to display before the name of the recipient in the fax
page header. Default:
To: .
ignore_mail_pages
ipc_channel_count
ipc_base_name
keep_debug_image_always [boolean]: This is used when the
debug_re-
cieved_image_types is enabled. Setting this true does not delete the debug
file if it converts ok. Default: false .
last_message_handle [dword 0–65535]: This entry is written by Icf_main
whenever it creates a new message handle. It is read during load to determine
what the starting next message handle should be. If it is not present during
load, ICANFax will fallback to its default method of determining the next mes-
sage handle by scanning the queues for the highest message handle present.
This was created because some buggy modules would delete an ICANFax mes-
sage, but keep the handle number to themselves for their own future reference.
If ICANFax had been reloaded, it would reuse these deleted handle numbers
which would cause the buggy modules to behave in a buggy way. This new
method should insure a full cycle (64K) of message handle numbers across
multiple loads of ICANFax before a message handle number gets reused by
ICANFax. Default:
0 .
max_consecutive_failed_sends [dword 0–255]: When a device has failed to
send successfully this many times in a row, that device will not be allowed to
send again. Set this to
255 to disable this feature. Default: 255 .
multi_page_header_suppression [boolean]: Determines whether or not to
suppress the fax page headers of all the pages of a multi-page ASCII file when
the
NO_DEFAULT_HEADER mask is used in the file_list_file entry for that
file. If
false
, only the first page will have no header, and all the remaining