FaxBack NET SatisFAXtion 8.7 (Including R3) - Manual User Manual
Page 46
2 – Server Administration
NET SatisFAXtion 8.7 Manual
46
<PB_FIRST_NAME />
<PB_MIDDLE_NAME />
<PB_LAST_NAME />
<Groups>Supervisors,Custom Group 1</Groups>
</USER>
</USER_LIST>
<GROUP_LIST>
<GROUP>
<GROUP_NAME>Custom Group 1</GROUP_NAME>
<UG_UNIQUE_ID>1</UG_UNIQUE_ID>
<USER_DTMF_ROUTING>5550124</USER_DTMF_ROUTING>
<USER_CSID_ROUTING>5550124</USER_CSID_ROUTING>
<USER_T30_ROUTING>5550124</USER_T30_ROUTING>
<USER_LINE_ROUTING>CLASS1_COM5</USER_LINE_ROUTING>
<USER_DESCRIPTION>Users Group</USER_DESCRIPTION>
<GROUP_PRIVILEGES>1</GROUP_PRIVILEGES>
<GROUP_TYPE>65537</GROUP_TYPE>
<GROUP_IS_ROUND_ROBIN>0</GROUP_IS_ROUND_ROBIN>
<RR_ALL_TO_USER />
<GROUP_AUTO_ADD_PASSWORD />
<GROUP_AUTO_ADD_AT_LOGON>0</GROUP_AUTO_ADD_AT_LOGON>
<UG_REQUIRE_CHANGE_PASSWORD>0</UG_REQUIRE_CHANGE_PASSWORD>
</GROUP>
</GROUP_LIST>
</CAS_USERS_AND_GROUPS>
See the Spreadsheet section above for descriptions of these tags.
The GROUP tags are defined as follows:
GROUP_NAME: The name of the group.
UG_UNIQUE_ID: Export only; this tag will be discarded on import. The internal
unique identifier used for this group.
USER_DTMF_ROUTING : Route all faxes received with this DID to this group.
USER_CSID_ROUTING : Route all faxes received with this CSID to this group.
By convention set to the same as USER_DTMF_ROUTING since the Adminis-
tration program will synchronize all three routing identifiers.
USER_T30_ROUTING : Route all faxes received with this T.38 subaddress to
this group. By convention set to the same as USER_DTMF_ROUTING since the
Administration program will synchronize all three routing identifiers.
USER_LINE_ROUTING: Route all faxes received on this port to this group.
Multiple instances of this tag are allowed, to route multiple ports to this group.
USER_DESCRIPTION: A free-text field where you can describe this group.
GROUP_PRIVILEGES: The privilege level granted to the users in this group.
The values are:
1
: User
17
: Router
4294967295
: Supervisor
GROUP_TYPE: Reserved for built-in groups. Do not specify
GROUP_TYPE
for
user-created groups.
GROUP_IS_ROUND_ROBIN: Enables “round-robin routing” for this group.