FaxBack NET SatisFAXtion 8.7 (Including R3) - Manual - Manual (Page 77)

2 – Server Administration NET SatisFAXtion 8.7 Manual 77
2.6.3.3
Testing Validation Rules
1.
In the Validation Editor dialog, click the Validate button. The dialog shown
below appears.
2.
Enter a number in the field provided. You can either type the number using
your keyboard or click numbers on the dialog’s number pad.
3. Click the Validate button. Note the feedback in the Results area to the
right.
4.
To perform another test, repeat steps 2 and 3; to return to the Validation
Editor, click Close.
2.6.3.4
Scenario: Seven Digit Local Dialing
In this scenario, the following transformations will occur:
•
User supplies 7 digits: Dials as supplied.
•
User supplies local area code + 7 digits: Area code is stripped, and
the seven digits are dialed.
To implement this, open the Validation Editor and locate the rule (in the top
pane) named “Example - trim area code from local numbers.”
Illustration 2.6.3.3#1: Validation – Testing Address Validation