KEYENCE DV-90 User Manual
Dv-90, User’s manual
Advertising
Table of contents
Document Outline
- Safety Precautions
- CE Marking and UL Conformity
- Software Licensing Agreements
- Content
- Manual Structure
- Chapater 1 Getting Started
- 1-1 Checking the Package Contents
- 1-2 Overview of DV-90 Functions
- Automated Product Selection at an Assembly Workstation
- Preventing Mixing with Other Products at a Packaging Machine
- Preventing Misplacement of Raw Material
- Preventing Mispackaging in a Manual Packaging Process
- Verifying the Assembly Instruction by Comparing with the Customer Order Sheet (Kanban)
- Checking the Print Quality of the Expiration Date or Manufactured Date
- Checking the Barcode Print Quality at the Printing Process
- 1-3 DV-90 Layout
- 1-4 System Configuration and Connectable Devices
- Chapter 2 Initial Setup of the Code Reader
- Chapter 3 Connections and Mounting
- Chapter 4 Basic Functions
- 4-1 Verification Function
- 4-2 Normal Verification
- Normal Verification Function
- Setting the Normal Verification Function
- Presetting the Master Data (Preset Mode)
- Presetting from the Desired Record Number
- Deleting the Master Data
- Working with the Normal Verification Function (Verification Mode)
- Confirming the Master Data
- Counter Function
- Timing Chart for Parallel Output
- Interlock Function
- 4-3 Active Verification
- 4-4 Step Verification Function
- 4-5 3-Point-A Verification Function
- 4-6 3-Point-B Verification Function
- 4-7 2-Point Verification Function
- Chapter 5 Extended Functions
- 5-1 Reference Data Function
- 5-2 Input Digit Limitation Function
- 5-3 Port Number Limitation Function
- 5-4 Verify Limitation Function
- 5-5 Read Quality Check Function
- Read Quality Check Function
- Changing the Settings of the BL Series
- Setting the “Read Quality Check Function” of the DV-90
- Installing the Code Reader under the Same Conditions as in the BL Series
- Setting the Optimum “Quality Level ” in the DV-90 Test Mode
- Confirming the Optimum Setting by Executing an Actual DV-90 Read Operation
- 5-6 Data Editing in the Preset Mode
- Chapter 6 Setting
- Chapter 7 How to Use the SetUp Software
- Chapter 8 Serial Communication
- Chapter 9 PLC Link
- Appendix