KEYENCE DV-90 - Manual (Page 148)

7-10 E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
7-3 Setting Procedure
„ PORT1/PORT2 Settings
The items displayed in PORT1 and PORT2 vary depending on the “Connect Unit” set in the Basic
Settings.
(Connect Unit: PC or None)
Data Length
Parity
Details
Baudrate Stop Bit Default
• Baudrate
Specifies the baud rate used for commu-
nication.
600
1200
2400
4800
9600
19200
312500
38400
57600
115200
• Data Length
Specifies the data length of the data for-
mat.
• Parity
Specifies the parity of the data format.
• Stop Bit
Specifies the stop bit of the data format.
• Details
Specifies the detailed communication
settings.
(
Refer to 7-11)
• Default
Returns the communication settings to
the default value.
The default value varies depending on
the specified “Connect Unit” and “Type”.
(
Refer to 6-10)