KEYENCE DV-90 User Manual
Page 54
Advertising
3-20
3
C
on
necti
ons
and
M
ounti
ng
E DV-90-IM
3-3 USB Interface Connection/Driver Installation
5
Select “Search for the best driver in these locations”. Select within this group
“Include this location in the search”. Specify the “driver” folder in the CD drive,
and click [OK].
6
After the USB driver to be installed is found, a warning message may appear
indicating that the driver has not been compatibility tested by Microsoft. How-
ever, click [Continue Anyway] and proceed with the installation.
7
When the driver file has been copied and the completion screen is displayed,
click [Finish].
8
Then, the notification “Found New Hardware” is shown at the lower right of the
screen.
Advertising