KEYENCE DV-90 User Manual
Page 158
7-20
E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
2
Select “Date Compare”.
3
Configure the settings.
4
When the [OK] button is clicked, “Date Compare” is activated.
01 14111122223333 17 XXXXXX
Product code Manufactured date
In the case of the barcode shown above, when judging the products manufactured within 30 days
from the time the barcodes are read as Verify OK, the Date Compare range is as follows. Register
the product code in Master data 1 beforehand.
Note
• When the Date Compare is activated, the selected master data is overwritten.
• Setting range is –10000 to +10000.
• The number in the setting range is expressed in five digits. When “10” is entered, “00010”
is registered.
Verify Limit
Direction
Master data to be used to
set the upper and lower limits
Maximum range
Digit Start
Minimum range
Logic
Example