KEYENCE DV-90 - Manual (Page 229)

9-29
9
E DV-90-IM
PLC Link
9-5 Settings
„ AJ71QC24 (-R2), A1SJ71QC24 (-R2)
„ QJ71C24 (-R2), QJ71C24N (-R2/R4)
Set the communication conditions on the GX Developer.
(“PLC parameter” > “I/O assignment”)
(“PLC parameter” > “I/O assignment” > “Switch”)
Prefix setting 0 0
Mode configuration 4 (dedicated protocol mode, ASCII mode, type 4)
Operation setting Independent operation
Data bit length 8 bits
Parity Odd
Stop bit length 1 bit
Sum check Yes
Write during RUN Enabled
Setting change Enabled
Transmission speed 9600 bits/s
Type Intelligence
Model name Model name of the unit to install
Number of points 32 points
Head X, Y Head input/output signal number of the target unit (hexadecimal)
Setting switch Setting item Setting value
Switch 1 (ch1)
or
Switch 2 (ch2)
Operation Setting Independent
Data bit length 8 bits
Parity Odd
Stop bit length 1 bit
Sum check Yes
Write during RUN Allowed
Setting change Allowed
Transmission speed 9600 bits/s
Switch 1 (ch1)
or
Switch 2 (ch2)
Communication protocol MC protocol format 4
Switch 5 Prefix setting 0