Setting “date compare, Setting “date compare” -22 – KEYENCE DV-90 User Manual
Page 120
5-22
E DV-90-IM
5
Ex
tend
ed Fun
c
tions
5-6 Data Editing in the Preset Mode
5
Exit the detail mode.
Press the
key.
The record number indicator LEDs stop flashing.
6
Exit the preset mode.
Press the
key.
The Verify Limit is completed.
Setting “Date Compare”
1
Display the data detail screen.
Perform Steps 1, 2, and 3 of “Displaying the Mas-
ter Data for Editing”.
2
Move to the edit mode.
Press the
key.
The cursor appears.
3
Input the date information.
Refer to “Editing the Data Contents” for the setting
method.
4
Set “Date Compare”
Display “Designation” by pressing the
key, and
then press the
key.
Select “Date Compare” by pressing the
or
key, and then press the
key.
Reference
For each record, Master1,Master2 and Master3 can each have their own verify limit.
Note
Use the SetUp Software to set the verify limitation, for best results. (
Refer to 7-17)
Note
Input the date information using six digits (–10000 to +10000) including the “+” and “–”
signs.
10 days
→ +00010
100 days
→ +00100
ESC
PRESET
( E M P T Y )
M 1 :
0
M 1 : 1 / 1
EDIT
+ 0 0 0 1 0
M 1 :
Example
D a t e C o m p a r e
M 1 : D e s i g n a t i o n
EDIT