KEYENCE DV-90 - Manual (Page 44)

3-10
3
C
on
necti
ons
and
M
ounti
ng
E DV-90-IM
„ Connecting code readers of other manufacturers
Refer to the manual of the connecting code reader, and also refer to the following example for connection.
Wiring example
Connecting a PC or PLC
Connect an external device such as a PC or a PLC to PORT2.
„ Connecting a PC
Code reader of other manufacturer
9-pin D-sub (female)
# 4-40 screw
When connecting a code reader of other
manufacturer, set “CR1 Type” of “Main” to “Others”.
( Refer to 2-2)
Connector case
The connections can be established via the optional
cable OP-29859 (1.5 m).
Connector case Connector case
9-pin D-sub
(female)
# 4-40 screw
9-pin D-sub
(female)
# 4-40 screw
3-2 RS-232C Interface Connection