KEYENCE DV-90 - Manual (Page 140)

7-2 E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
7-1
Installation Procedure
This section describes how to install the SetUp Software to Windows 2000 using the following drive configuration
as an example.
C drive: hard disk drive
E drive: CD-ROM drive
Start up Windows 2000 and check that the SetUp Software CD-ROM is close at hand.
Note Before starting installation, quit all applications that are already running.
„ Operating environment
The operating environment of the SetUp Software is described below. Check the following items
before starting installation.
Installation Procedure for the SetUp Software
1
Turn on the power of the PC and start up Windows 2000. Log on as a user with
administrator authority.
2
Insert the supplied CD-ROM in the CD drive.
3
Double-click “setup.exe” in the CD drive.
4
The “DV-90 SetUp Software - InstallShield Wizard” starts. Click [Next].
Item Condition
Operating System Windows 8 (excluding Windows RT)
Windows 7 (32bit/64bit)
Windows Vista (32bit)
Windows XP (32bit)
Windows 2000
CD-ROM drive Required at the time of installation
Display Resolution: 800 _ 600 or higher
Printer Required when printing the setting contents and Quick Setup Codes.
Serial port One RS-232C port or USB port is required.