KEYENCE DV-90 - Manual (Page 151)

7-13
7
E DV-90-IM
How to Use the Setup
So
ftw
a
re
7-3 Setting Procedure
„ I/O Settings
REMOTE Key
Active Record Select Notify
Preset Mode Notify
Output Delay Time
Input Type
Output On Time
• Input Type
Sets the input polarity.
• Output On Time
Sets the parallel output ON time.
(
Refer to 4-11)
• Output Delay Time
Sets the parallel output delay time.
(
Refer to 4-11)
• Preset Mode Notify
Sets Enable/Disable of the preset mode
status output. (
Refer to Appendix-
18)
• Active Record Select Notify
Enables/Disables the active record
selection notification.
• REMOTE Key
Sets the key activated by the REMOTE
input. (
Refer to 3-4)
OFF
[Preset Key] KEY
[ESC] KEY
[ENTER] KEY