KEYENCE DV-90 - Manual (Page 230)

9-30 E DV-90-IM
9
PLC Link
9-5 Settings
Settings for the SYSMAC Series
„ Settings of the DV-90
„ C120-LK201-V1
* The data length, parity, and stop bit are fixed to 7, even, and 2, respectively.
„ C200H-LK201-V1
PORT2 connecting device PLC Link
PLC type SYSMAC
PLC unit ID 0
Baud rate 9600 bits/s
Data length 7 bits
Parity Even
Stop bit length 2 bits
Note
Set the data length to “8 bits” when the code reader to be connected to the DV-90 is a
2D code reader that also reads double-byte codes.
Set the data length to “8 bits” in the PLC setting as well.
Unit number 0
Transmission speed * 9600 bits/s
1:1/1: N Handshake 1: N procedure
Level setting Valid for level 1, 2, and 3
CTS selection 0 V
Synchronization selection Internal synchronization
Unit number 00
Transmission speed 9600 bits/s
Command level Valid for level 1, 2, and 3
Data length 7 bits
Parity Even
Stopbit length 2 bits
1:1/1: N Handshake 1: N Handshake
5-V supply None