KEYENCE DV-90 - Manual (Page 168)

7-30 E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
Reading the Quick Setup Codes
1
Press the key for one second to display
the setting menu.
2
Press the key six times, and then
press the key. The DV-90 enters the
code setting mode. The laser beam illumi-
nates in the barcode reader, indicating that
the barcode reader is ready to read the
data.
The DV-90 also enters the code setting mode when
you press the
key after the setting menu is dis-
played.
3
Read the printed Quick Setup Code from
top to bottom with the barcode reader.
When all the barcodes are read, the laser beam is no
longer illuminated, and the screen to the right is
displayed.
4
Press the key.
The DV-90 is set to the contents of the Quick Setup
Code.
Configuration of the settings using Quick Setup Code is completed.
MENU
D V - 9 0 Q u i c k S e t u p
1 / 3
FNC
D V - 9 0 Q u i c k S e t u p
1 / 3
S a v e C o n f i g ?
Y e s - E N T N o - E S C
7-6 Quick Setup Code of the DV-90