KEYENCE DV-90 - Manual (Page 254)

Appendix-18 E DV-90-IM
App
endix
8
Preset Mode Status Output
By enabling “Preset mode status output” (refer to 6-11), the registration status in the preset mode can be output in
parallel transmission as follows.
➀...... Output ON time. Set in the “I/O OUT ON Time” in the “I/O” menu.
(
→ Refer to 6-11.)
(Acceptable range: 100 ms to 2550 ms. The factory setting is 500 ms.)
➁...... Output delay time. Set in the “I/O OUT Delay” in the “I/O” menu.
(
→
Refer to 6-11.)
(Acceptable range: 0 ms to 255 ms. The factory setting is 5 ms.)
2
1
1
OUT1~4
NG
OK
READ_ERR
2
Preset mode
start
Preset
Read error
Preset mode
end