KEYENCE DV-90 - Manual (Page 126)

6-2 E DV-90-IM
6
Setti
ng
6-1
Setting Procedures
This section explains how to navigate through the DV-90 setting menus using the front panel.
To Start the Setting Menu
The settings can be changed using the following procedure.
1
Press the key for one second.
The message to the right is displayed, followed by
the main menu.
2
Select the setting menu by pressing the
or key.
The “
■
” mark is displayed on the number of the
selected setting menu. The “
■
” indicates that the
setting menu is being selected.
To display the setting menus shown in Step 3 and
onward, press several times.
3
Press the key.
By pressing the key, the setting items of the
selected setting menu are displayed.
The screen to the right shows the setting items of
“1 Main”
4
Select the setting item that you want to
change.
Select the setting menu by pressing the or
key.
5
Change the setting by pressing the
key.
The “
■
” mark is displayed at the bottom of the
setting screen.
The item at the bottom is switched by press-
ing the or key. Press the or
key until the desired setting item is displayed.
6
Confirm the setting by pressing the
key.
Pressing the key or the key cancels the set-
ting, and returns to Step 3.
C o n f i g
MENU
1 M a i n
2 V e r i f y
0 : N o r m a l
0 1 V e r i f y T y p e
1 : P C
0 4 P O R T 2 U n i t
1 : P C
0 4 P O R T 2 U n i t
ESC DEL