KEYENCE DV-90 - Manual (Page 231)

9-31
9
E DV-90-IM
PLC Link
9-5 Settings
„ C500-LK201-V1 , C500-LK203
* In the C500-LK201-V, the data length, parity, and stop bit are fixed to 7, even, and 2, respectively.
„ CV500, CV1000, CVM1
(Switch)
(DIP switch)
(System setting)
Link unit C500-LK201-V1 C500-LK203
5-V supply selection OFF
Input/output port selection RS-232C
Synchronization selection Internal
CTS selection 0 V
Unit number 0
Parity Even
Transmission code
Data length: 7 bits
Stop bit: 2 bits
Transmission speed * 9600 bits/s
1:1/1: N Handshake 1: N Handshake
Level setting Valid for level 1, 2, and 3
Link unit CPU internal port CV500-LK201
Unit number (Port 2) 00
RS-232C/RS-422A selection RS-232C
Communication path selection (port 2) RS-232C
5 V output setting (port 2) No 5-V supply
Communication condition setting
Communicates in the PC system
value (SW4-OFF) Communicates in the PC system
value (SW1-OFF)
CTS selection
CTS always ON (SW2-ON, SW3-
ON)
Loopback communication test
Normal operation (SW5-OFF,
SW6-OFF)
Unit number 00
Transmission speed 9600 bits/s
Stopbit length 2 bits
Parity Even
Data length 7 bits
Xon/Xoff control Not performed
Communication method Full duplex