4 sending and receiving the settings, Sending the settings, Sending and receiving the settings -21 – KEYENCE DV-90 User Manual
Page 159: Sending and receiving the settings
Advertising
7-21
E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
7-4
Sending and Receiving the Settings
The settings and the master data can be sent and received using the SetUp Software and the DV-90.
Sending the Settings
The settings and the master data are sent to the DV-90.
1
Connect the DV-90 and the PC.
When using PORT2
⇒
Refer to 3-10.
When using USB
⇒
Refer to 3-13.
2
Check that the communication settings for the PC and the DV-90 are the same.
To set the communication settings, select [PC Communication Setting] from the [Communica-
tion] menu.
Note
When using PORT2, set “Connect Unit” of PORT2 to “PC”. (
Refer to 6-5)
DV-90
PC
Advertising