KEYENCE DV-90 - Manual (Page 143)

7-5 E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
7-2
Overview of Operation Method
This section describes the screens of the SetUp Software and the startup procedure.
Start and Quit
„ Startup procedure
1
From the Start menu, select [Program] > [DV-90] > [DV-90 SetUp Software].
The SetUp Software starts up.
The SetUp Software can be operated using the setting buttons at the left-hand side of the screen, and
the menu commands.
When the button is clicked, the screen switches and the related setting items are displayed.
„ Exiting procedure
1
From the [File] menu of the SetUp Software, select [EXIT].
Note
To apply the setting contents configured on the SetUp Software, the settings should be sent
to the DV-90. ( Refer to 7-21)
[Main Settings] button
Sets the verification type and the con-
necting devices.
( Refer to 7-7)
[DV-90 Settings] button
Sets the verification setting, PORT1/
PORT2 setting, I/O setting, and
options setting. ( Refer to 7-8)
[Master Data Setting] button
Sets the master data.
( Refer to 7-15)
[Receive] button
Receives settings from the DV-90.
( Refer to 7-23)
[Send] button
Sends settings to the DV-90.
( Refer to 7-21)
[DV Quick Setup Code] button
Prints the Quick Setup Codes.
( Refer to 7-28)
Menu bar
Displays the menus of the SetUp Software.