KEYENCE DV-90 - Manual (Page 153)

7-15
7
E DV-90-IM
How to Use the Setup
So
ftw
a
re
7-3 Setting Procedure
Master Settings
The master data of the DV-90 is set in the Master Settings.
Data and reference data should be input from the keys.
Output No.
Input Port Limit
Record Number
Output Number
Master 1
Type
Direction
Reference Data
Limit Start
The display is shifted using the scroll bar.
To see the above items,
slide the column lines to
the right.
Limit Digits
Logic
• Record Number
The record number of the master data.
(
Refer to 4-2)
• Output No.
Sets the output number (1 to 900) of the
parallel terminal corresponding to the
record number.
(
Refer to 4-2)
The output numbers at Verify NG, Read
Error, Verify Step OK, and Verify Master
NG can be changed.
• Input Port Limit
Select whether to limit the input port to
PORT1 or PORT2, or to use both.
(
Refer to 5-7)
ALL
PORT1
PORT2
• Reference Data
Sets the reference data characters.
( Refer to 5-2)