KEYENCE DV-90 - Manual (Page 55)

3-21
3
C
on
necti
ons
and
M
ounti
ng
E DV-90-IM
3-3 USB Interface Connection/Driver Installation
9
“Found New Hardware Wizard” automatically starts. Select “Install from a list or
specific location (Advanced)” and then click [Next >].
10
Select “Search for the best driver in these locations”. Select within this group
“Include this location in the search”. Specify the “driver” folder in the CD
drive, and click [OK].
12
When the driver file has been copied and the completion screen is displayed,
click [Finish].
11 After the USB driver to be installed is found, a warning message may appear
indicating that the driver has not been compatibility tested by Microsoft.
However, click [Continue Anyway] and proceed with the installation.