KEYENCE DV-90 - Manual (Page 199)

8-21
8
E DV-90-IM
Ser
ia
l Comm
unicati
on
8-3 Command Communication Details
When using Verify Normal, if you want to specify the number written above in Record number 2,
send the command as follows. Items other than the replacing character and the master data are in
the default settings.
MSET0 002 ENGIN-B 45678
s substitute the output number and the input limit because they are used in default settings.
The commands after “Designation 1” are omitted because they are used in the default settings.
When using Verify Active, if you want to initialize the data in Record number 10, send the com-
mand as follows. All the data can be initialized by omitting all commands after the “Output
number”.
MSET1 010
• Record number : 005
• Master data 1 : 12345Verify LimitForward Limit Start1
Limit Digits5
• Master data 2 : 6789Verify Limit Forward Limit Start10 Limit Digits4
• Master data 3 : AAAVerify Limit Reverse Limit Start1
Limit Digits3
When using the Verify 3points-A, if you want to change the data as written above, send the com-
mand as follows:
MSET3 005 12345 1 1 001 005
6789 1 1 010 004 AAA
2 001 003
Record
number
Output
number
Port
number
limitation
Replacing
characters
Master
data 1
Master 1
Designation
Master 1
Direction
Master 1
Limit
Start
Master 1
Limit
Digits
Master 1
Compare
Logic
001 001 ALL ENGIN-A 12345 0 1 001 500 0
002 002 ALL ENGIN-B 45678 0 1 001 500 0
HT HT HT HT HT
HT
Example
HT
Example
HT HT HT HT HT HT HT HT HT
HT HT HT HT HT HT HT HT HT HT
HT HT
Example